Small Geometric Planter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Small spiral planter designed to print in Vase Mode.
- Ocena
- 4,943 / 5
- Polubienia
- 5592
- Pobrania
- 19 037
- Wydruki
- 127
- Wyświetlenia
- 65 484
- Oceny
- 106
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Attribution — Noncommercial
A small flower pot designed to be printed in "vase mode." Due to this, it prints faster and with better quality, especially on budget 3D printers.
If printed in vase mode, the pot is not watertight. If you want a watertight pot, consider applying the following settings:
- 0% infill
- 3-5 Perimeters
- 3-5 bottom layers
- 0 top layers
If you want to print a bigger version, check out this model: https://www.printables.com/de/model/221736-geometric-planter-1
I also made a lampshade with a similar design https://www.printables.com/de/model/221829-geometric-spiral-lampshade-2
Changelog:
- 07.2022 Version 2 with flat bottom
Don't have a printer and would like to have this model printed for you?
https://vulkaza.com/products/small-geometric-planter?_pos=1&_psq=Druckwer&_ss=e&_v=1.0