X215 Pro Arm Bumper and Soft Motor Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is an arm bumper and soft motor mount for the Furibee X215 Pro FPV Racing Drone I remixed the soft motor mount by…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 213
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
This is an arm bumper and soft motor mount for the Furibee X215 Pro FPV Racing Drone
I remixed the soft motor mount by @mcooz to add a lip to keep it from coming up during crashes, and to provide a bit of protection to the bottom of the arms.
I printed in TPE, nice and slow at 30mm/s, with retraction disabled, coasting and combing enabled, supports enabled, support interface enabled, etc.
I damaged a couple of the stock motors, so I swapped them out for the RaceDayQuads Badass 2206 2450kv Naked Bottom Racing Motor.
I switched to a Mach 2 VTX with MMCX connector, so I'm also using this FC stack mount for RDQ Mach 2 VTX (slim underslung version) by Wile_E.
Print instructions
Category: R/C Vehicles Print Settings
Printer Brand: Monoprice
Printer: Maker Ultimate
Rafts: Doesn't Matter
Supports: Yes
Resolution: 0..2mm
Infill: 100%
Filament: Inland TPE Black
Notes:
- Speed: 30mm/s
- Retraction: disabled (all metal hotend)
- Coasting: enabled
- Combing: enabled (All)
- Supports: enabled
- Support Interface: enabled