Sovol 40W laser head bracket for Xchange
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Got the Sovol 40w laser head for use with the Xchange and wanted to mount it. With a static BL Touch mount (that stays…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 188
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
Got the Sovol 40w laser head for use with the Xchange and wanted to mount it.
With a static BL Touch mount (that stays on the printer with the electrics). Please see my other makes.
Mounting the laser straight to the tool changer it sat too high and with the laser at 20mm the BL Touch would crash into the material.
All in all its a simple print with 2 holes to attach to the tool changer, then a 90 degree and then the mounts for the laser. I have put some strengthening pillars on the back just to make sure it doesn't move around.
Best part is NO additional hardware is needed, it uses the screws in the box with the laser.
Printed in PLA with no issues with strength and the laser does not get hot so no warping.
Category: 3D Printer Accessories