Peg game Name Badge 1.6
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This name tag can be used in many ways, the lettering is created using a pin matrix. Like in the game Peg.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 158
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- 2D Plates & Logos
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This Name Badge uses a matrix of holes 9 X 15 and Coloured pins to display a Name or something else. Also when bored you could use it as a Peg game.
I printed the first version and thought there should be more Pins and a firmer fit - so I redesigned the holes and improved the board a bit. Also the colour change is now on the right position.
I included some pre sliced files but also the stl file so you could make your own G-codes. The model should work with every print settings and without Supports or brims. I printed it with the standard 0.15mm settings of the Prusa Slicer.