1 / 1
Ham Radio Antenna Wire to Rope Insulator - 14awg
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Made for 14AWG wire. You don't need all the holes. Attach a rope to the larger hole and pull it up into a tree.
- Ocena
- 5 / 5
- Polubienia
- 51
- Pobrania
- 290
- Wydruki
- 3
- Wyświetlenia
- 1009
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Public Domain
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 3) (Komentarze: 6)Remiksy (0)Kolekcje (84)Powiązane
I made this to attach a 14AWG wire to a rope for my EFHW antenna. You don't need to use all four holes to get enough tension to hole the wire, I used 2. Simply attach a rope/paracord through the larger hole and you're all set to hoist your antenna up into a tree!