Filament dust filter with 6mm tube

A remix to Haprog's filament dust filter https://www.thingiverse.com/thing:3404664

This remix utilizes the use of filament dry box feed tube (OD=6mm, ID=4mm) is secured on the entry of this dust filter (refer to the photo attached) with the help of custom clip. On the exit, another cut of the feed tube is placed, going through the filament guide towards the extruder.

Print with support (touching build plate only).

I found that the clearance was abit loose when I printed mine and the hinge was also loose not holding the parts together, but the custom clip does well to secure the device.

My printed version was designed with 6.2mm hole diameter for the feed tube and it sits loose, so I use some tape to secure it in place. Redesigned with 6.1mm hole but if you found yours also loose, just use some tape like mine (electrical tape or ptfe tape works just fine).

Print Settings

Printer Brand:

Creality

Printer: 

Ender 3 v2

Rafts:

Doesn't Matter

Supports: 

Yes

Resolution:

0.2

Infill: 

25%

Filament: Smith3D PLA+ / PLA Pro Light blue
 

Notes:

0.4mm nozzle. Print with support (touching build plate only)

Custom Section

Optional #1: Ender 3 filament guide with 6mm tube

Filament guide with feed tube (OD=6mm) to the creality all metal (MK8 iirc) single gear extruder for Ender 3. Your mileage may vary depending on the type of extruder you have but I think it should be fine.

Refer to the images attached.

The file to this thing can be found here: https://www.printables.com/model/222159-ender-3-filament-guide-with-6mm-tube