1 / 5
Angle Bracket - Aluminium profile
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Angle bracket (L-shaped) for ~42mm-50mm aluminum structures. The piece has protrusions to avoid angular rotation…
- Ocena
- 5 / 5
- Polubienia
- 25
- Pobrania
- 239
- Wydruki
- 1
- Wyświetlenia
- 1316
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 1) (Komentarze: 1)Remiksy (0)Kolekcje (52)Powiązane
Angle bracket (L-shaped) for ~42mm-50mm aluminum structures.
The piece has protrusions to avoid angular rotation during screw tightening.
Please review the technical drawing to verify if the measurements are adequate for your needs.
Print Settings
Printer:
Creality Ender 3 v2
Rafts:
Yes
Supports:
No
Resolution:
100
Infill:
75%
Filament:
Any PLA
Any
Notes:
Print the pieces flat on the hypotenuse from the triangle to avoid supports.
No special parameters are needed. Just print slow and with >75% infill to increase mechanical resistance.Cheers guys
dzalf
Category: 3D Printing