Customized Sanding Sticks with Labels
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Sanding sticks with colored labels
- Ocena
- 4,897 / 5
- Polubienia
- 5090
- Pobrania
- 11 825
- Wydruki
- 250
- Wyświetlenia
- 41 761
- Oceny
- 203
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Customized version of https://www.thingiverse.com/thing:2404850, with added labels on top, to show the grit of sandpaper used. They go from 80 to 3000. If your sandpaper is a different grit, there's a blank top template provided. With the new Add Text option in Prusaslicer 2.6 it's easier than ever to add your own labels.
NEW: Companion stand, pegboard holder, and cutting guide at https://www.printables.com/model/216061
UPDATE 11/8/21: Added 80 and 100.
UPDATE 8/21/2020: There was an error in the all-in-one model.
Also check out Rob5251's remix of the screws to make them larger and easier to handle. Nice idea, no need for me to “sherlock” it.
Print instructions
For each stick, you'll need to print a bottom part, a pair of screws, and a top part. Print with 0.3 or 0.2 mm layer height, 15% infill, no supports.
For colored labels, add a color change in PrusaSlicer at 5.8 mm if you're using 0.2mm layer height, or 5.9mm for 0.3mm layer height.
If you like what I'm doing…
… consider buying me a coffee or joining my Club.