Xiaomi Mi Vacuum Cleaner Mini Wallmount Charging Station + Cable Locking Wedge
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I want a holder that can keep my Xiaomi Mi Vacuum Cleaner Mini on the side of a shelf.
- Ocena
- 5 / 5
- Polubienia
- 25
- Pobrania
- 129
- Wydruki
- 4
- Wyświetlenia
- 1132
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
Update V2.1
@computer22 Raised the issue of the loose charging cable slot, and I have to say he is right.
To avoid reprinting the entire base, I made this wedge, print two, insert and press them down tight.
To remove, push them out from the back.
I want a holder that can keep my Xiaomi Mi Vacuum Cleaner Mini on the side of a shelf. I've seen some good designs, but I don't want to remove two nozzles from the main body every time.
So I made my own, which:
- Charging (using the C cable from the package)
- Print without support material.
- Easy installation, no need to pre-drive two screws into the wall and hope they are aligned.
- Can sit on the table.
Installation:
You will need two #8 flat head screws;
Screw the first one into the mounting surface;
Slid in the bottom hole on the back of the printed charging station;
Adjust the angle until it is perpendicular to the ground;
Drive in the other screw from the front.
Wa-lah!