Flair Pro 2 Organizer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I want a single-row organizer that can fit in all the Flair Pro 2 accessories, so I made one. There are three…
- Ocena
- 5 / 5
- Polubienia
- 27
- Pobrania
- 182
- Wydruki
- 3
- Wyświetlenia
- 1266
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I want a single-row organizer that can fit in all the Flair Pro 2 accessories, so I made one.
There are three versions:
- A four-segment split that can be printed by a small printer, connected with printed tabs. Print all 4 parts and 6 connectors; press all the connectors into the grooves; glue is optional. (I printed this version because I was too lazy to turn on my SM A350 in the basement, the thinner base can be printed quickly and with less plastic. Anyway, I'm not going to use my organizer as a tray, so no need for strength.)
- One-piece base with a thickness of 5mm.
If you don't like visible seams, this one might be better. Should be able to be used as a tray, but I haven't tested it. You need a print bed of at least 300x300mm. 3. One-piece base with a thickness of 11mm.
If the organizer needs to be used as a tray, it is recommended to print this version. The metal parts of the Flair have some weight, and no one wants the organizer to break in the air and parts to fall.
The CAD file is uploaded, make any modifications you like ;)
Print Settings
Printer:
Voron 0.1
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
20%~40%
Filament:
SnapMaker PLA/ ABS
Black
Notes:
When used as an organizer tray, increase wall thickness and infill for strength.
Category: Kitchen & Dining