Cetus 3D PCB Cable Manage Cover current version
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
From the moment I assembled the machine, I really didn't like the way the cable above the extrusion head was always…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 218
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
From the moment I assembled the machine, I really didn't like the way the cable above the extrusion head was always tilted.
So I tried to modify a few PCB covers that I can find on the website, but I found that they all don't match the machines I bought recently, some are too thick and some are hard to print.
So I simply made one myself.
The main body is similar to the original, I added a cable manager to it.
Then now it looks like this, which makes me feel that this cable looks more stable.
Of course, you can also take the original one, then drill two holes and wear a strap, the same effect.
This is just in case you look at the slanted cable, and it’s not pleasing to the eye.
Print Settings
Printer:
Cetus 3D
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
0.2mm
Infill:
15%
Notes:
Turn the upper part over to print
Category: 3D Printer Parts