Card Holder/Insert for Exploding Kittens
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
For sleeved and unsleeved cards
- Ocena
- 5 / 5
- Polubienia
- 29
- Pobrania
- 146
- Wydruki
- 6
- Wyświetlenia
- 1426
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution — Share Alike
I didn't like any of the inserts/card trays for Exploding Kittens, with the exception of https://www.thingiverse.com/thing:1957634, which itself is a remix of https://www.thingiverse.com/thing:854289. But it's too small, and the tray can move around in the box.
So I first widened it a bit, and two trays fill the box now in its width but they can still move around along the other dimension. Next, I was playing with adding a "hump" to the back of the trays to anchor them in place but eventually I just went with a small lip in the front, which I think looks nicer and uses less filament.
UPDATE: Added a version for sleeved cards. You'll need two trays to hold all sleeved cards from the base edition.
Print instructions
Resolution: 0.3
Infill: 10%
Notes:
The tray has a tapered top of the base, and to get a smooth surface without ridges you'll need to print it at 0.1 mm resolution. I couldn't care less, so I just printed it at 0.3 mm. Or try an adaptive resolution setting in your slicer.
If you like what I'm doing…
… consider buying me a coffee or joining my Club.