C64 Simple Power Supply PSU Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A case for a simple power supply for the C64. Made with two wall warts and an extension cable, and a 7pin DIN.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 45
- Wydruki
- 0
- Wyświetlenia
- 337
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
I wanted to build an ultra simple C64 power supply using two wall warts (5v DC, 9v AC) and an extension cord. I used zip ties to help keep the cables from pulling out of the box.
I designed this box to contain the power supplies and to protect the crimped connections, etc. Yeah, it's pretty chunky compared to commercial offerings, but is effective and is an easy build.
More photos to come shortly.
Items used in this build (not affiliate links)
- Extension Cord
- 5V DC 3A power supply
- 9V AC 1.5A transformer
- 4 conductor cable
- Geeetech Transparent PLA
- Four M3x12 Screws
- 7 pin din - there are probably better choices
- 16-22 AWG Butt Splices
- Ratcheting Crimper
- Soldering iron
- Solder
If anyone wants a Fusion 360 export, let me know.
Print Settings
Printer: Prusa i3 MK3
Rafts: No
Supports: Yes (on Base.stl)
Resolution: 0.3mm
Infill: 15%
Filament: Geeetech PLA Transparent
Notes:
Print in the provided orientation.
Supports are desirable on Base but not necessary on the larger print, Lid.