1 / 1
2x3 Rack J Cup Protectors (PRX and Titan T3) — zdjęcie 1

2x3 Rack J Cup Protectors (PRX and Titan T3)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Inspired off of Aperture Engineering's Design. Currently using on PRX 2x3 J hook.

Ocena
0 / 5
Polubienia
18
Pobrania
42
Wydruki
0
Wyświetlenia
515
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Sports
Licencja
Creative Commons — Attribution — Noncommercial

Untested on Titan t3, however I think it will probably work. If you do not want to print check out Aperture Engineering's Design, he sells fully printed models and supports many other configurations and accessories.

I have attached solid works file and step for anyone who wants to make modifications. I will also be uploading a 3x3 rack version, but it will be completely untested as I do not have a 3x3 rack.

https://shop.apertureengineeringllc.com/

He also has some free models on thingiverse:
https://www.thingiverse.com/apertureengineering/designs


Installation:
Remove screw
Attach part,
VHB tape the underside to the hook (optional)
Reinstall screw 

Print instructions:

print in default orientation. Use max perimeters no infill. Use high wear resistant filament such as delirin, Igus iglide, PC, PETG. Try to avoid pla and abs.

Tagi