Klink
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The Pokemon, Klink!
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 51
- Wydruki
- 0
- Wyświetlenia
- 390
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Action Figures & Statues
- Licencja
- Creative Commons — Attribution — Noncommercial
Steel type lovers rejoice, for I present to you the Pokemon, Klink!
The model is for one of the gears that make up Klink. Print the model twice to get the full Pokemon.
I designed the model in such a way that the top few layers can be printed in different colors by pausing the print and swapping filament colors.
To match the picture of the Klink I printed out, I recommend printing the layers as follows:
- From the bottom up to top of gear, just before face starts: Gray/Silver
- The outer circle of the face: Black
- The surface of the face: Gray/Silver
- Mouth and outline of the eyes: Black
- Whites of the eyes: White
- Pupil of the left, rounded eye: Black
The nose is printed separately and will be a single color (turquoise if you want to be accurate to Klink's design).
By default, the model of the main body is 50mm in diameter. I recommend scaling up the models to 200% at least.