x-y step calibration very precise
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This method is not affected by extrusion width and be more precise in compare to model where you measure the outer…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 209
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Test Models
- Licencja
- Creative Commons — Attribution
This method is not affected by extrusion width and be more precise in compare to model where you measure the outer width.
Use sharp tool to scrape lines between holse to make a cross . Measure between cross points.
I use 150mm version because my caliper can measure up to 160mm.
To online calculate steps use 3.2 step in this document: https://docs.google.com/spreadsheets/d/1AYurIUz6pwcJbzzpIF4UwgEXCtxaEZ0okNuJRrKAkT8/edit?usp=sharing
Or download excel file here: https://www.thingiverse.com/thing:2390274/files
MARLIN users:
read current settings from EPPROM: M501
set new values: M29 X80 Y80 (where 80 is you value)
save setting to EPPROM: M500
3D Sources:
Print Settings
Printer Brand:
Anet
Printer:
A8
Rafts:
Doesn't Matter
Supports:
Doesn't Matter
Filament: Any Any Black
Category: 3D Printing Tests