1 / 6
Skyzone SKY01 V2 Faceplate for Fatshark foam — zdjęcie 1
1 / 6

Skyzone SKY01 V2 Faceplate for Fatshark foam

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a remix from https://www.thingiverse.com/thing:2922203 I made it 1mm thinner so it is fits on SKY01 now. And…

Ocena
0 / 5
Polubienia
2
Pobrania
50
Wydruki
0
Wyświetlenia
452
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution

This is a remix from https://www.thingiverse.com/thing:2922203

I made it 1mm thinner so it is fits on SKY01 now. And it is more flexible you can print with PLA and it will not break when you bend it during installation. It has a hole to use with a fan. I didn't try but I'll use it with https://www.thingiverse.com/thing:3785459

I printed with 2 layer of top and bottom thiknes to be more flexible. But I have not very good surface on top. 2 layer on bottom is ok, on top I recommend 3.

Category: R/C Vehicles

Tagi