SeaDuck Cowl Easy Print
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The original mix of the seaduck cowl had to be printed nose side up to get a good print out of it. That required A LOT…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 28
- Wydruki
- 0
- Wyświetlenia
- 225
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
The original mix of the seaduck cowl had to be printed nose side up to get a good print out of it. That required A LOT of support.
I sliced the cowl nose off so that it could be printed in two pieces: nose ring with nose up, and rest of cowl nose down. this eliminates the need for support completely.
I included a couple of alignment pins to help aligning the nose and cowl for gluing.
Print Settings
Printer Brand:
Wanhao
Printer:
Wanhao Duplicator i3 Plus
Rafts:
No
Supports:
No
Resolution:
0.08
Infill:
10
Filament: eSu PLA Red
Category: R/C Vehicles