RotorHazard / Delta 5 Timer Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I couldn't find any cases that matched my criteria so I designed my own. Access to ALL ports on the Pi 3b+ Simple to…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 18
- Wydruki
- 1
- Wyświetlenia
- 369
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
I couldn't find any cases that matched my criteria so I designed my own.
- Access to ALL ports on the Pi 3b+
- Simple to assemble
- Small as possible (with preference to low instead of thin
- simple to print
- Holds Delta 5 / Rotorhazard board securely
What this case does not do:
- No support for POE
- No support for voltage display or alarm
- No built in battery
- No fans.
I run it with a 3s 2200 mah battery that i plug a voltage alarm into when at the field.
At home I plug it into an old laptop powersupply (12v x 5A)
You will need 9 screws: M3x4mm.
One of these (I printed using flexible filiment): https://www.thingiverse.com/thing:3968167
Print Settings
Printer Brand:
Wanhao
Printer:
Wanhao Duplicator i3 Plus
Rafts:
No
Supports:
Yes
Resolution:
.2
Infill:
25
Filament: Inland PLA
Category: R/C Vehicles