Hight-adjustable camera holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Build a DIY microscope using the Raspberry Pi High Quality Camera and an old monitor stand
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 588
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Public Domain
HDMI microscopes are nice, but expensive, so I built my own. It's a Raspberry Pi 4 mounted to a Raspberry Pi High Quality Camera using the PCB mount from https://www.thingiverse.com/thing:4420496/files with a 100x microscope lens https://amzn.to/3MuxPEI attached. To be able to move the camera around, i attached it to a ball-head camera wall mount like https://amzn.to/3QbjJeA and to be able to move it up and down, I attached the wall mount's plate to the pillar of an old monitor stand like https://amzn.to/3zwybrt with this hight-adjustable holder and two M3 countersunk screws. It takes an M10 machine screw and a knurled nut to fasten.