Case for Motion and Temperature / Humidity Sensors for Home Automation
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a case for combining a PIR motion sensor and an AM2302 temperature/humidity sensor together with a WEMOS D1…
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 57
- Wydruki
- 0
- Wyświetlenia
- 534
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
This is a case for combining a PIR motion sensor and an AM2302 temperature/humidity sensor together with a WEMOS D1 Mini module to make an environment sensor for use in home automation.
For reference, the specific components I used are: AM2302 HC-SR501 D1 Mini
The case relies on a friction fit to hold the sensor plate onto the case body.
I removed the header pins and soldered directly to the the components to keep the unit as thin as I could. If you want more room for motion sensor header pins, you can increase the value of "side_z" in the parameters spreadsheet contained in the FreeCAD file and re-export the STL or AMF files. You'll still need to remove the pins from the AM2302 circuit board, since they are mounted to the front side of the board.
Category: DIY