Pikachu Hairclip Attachment
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Pikachu model with a slot to insert a hairclip.
- Ocena
- 4 / 5
- Polubienia
- 38
- Pobrania
- 135
- Wydruki
- 1
- Wyświetlenia
- 1031
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Costume Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Modified a Pikachu model to have a slot for inserting a hairclip.
Uses this style of hairclip:
I would use glue if you want a permanent attachment. The slot is big enough to make insertion easy, but Pikachu may fall out with increased physical activity. I was told by a child that Pikachu only fell once during the school day.
I printed with 0% infill to make it as light as possible, with 0.20 mm layer height and supports. I'd recommend slowing down the print for the ears: https://help.prusa3d.com/article/cooling_127569#cooling-thresholds= . In my attached picture, I did not tune the cooling threshold so the ear tips didn't print well.
Pikachu model originally by Patrickart: https://www.thingiverse.com/thing:3877926