Artillery SW-X1 roller for stock spool holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I got tired of adjusting the spool holder every time I changed filament, so I made some rollers that fit over the…
- Ocena
- 1 / 5
- Polubienia
- 7
- Pobrania
- 83
- Wydruki
- 0
- Wyświetlenia
- 727
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bambu Lab Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
I got tired of adjusting the spool holder every time I changed filament, so I made some rollers that fit over the stock bearings and fits up to a 70mm wide spool.
You will need to remove one flange bearing from each of the original bearing spots and retighten the nut/bolt to each of the bearings left in place, should look like the picture I attached.
Simply slide the roller over the bearings and re fix the holder to the printer. I got the bolts all started and put a spool on the holder, then tightened the bolts accordingly to make sure my spool didn't rock in the holder.
You will need 2 of these for one spool holder, I printed vertically using supports from the build plate to ensure the inside of the lower bearing holder printed and didn't affect the bearing when installed.
EDIT; I didn't see this model before I'm made and posted mine, but have become aware since posting it. Mine wasn't a remake of this one but great minds think alike !!
Print instructions
Category: 3D Printer Parts