BTT TFT35 V3.0 LCD cover for MK3/S Bear
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This LCD cover is to fit the Big Tree Tech TFT35 V3.0 on a MK3/S Bear frame.
- Ocena
- 4,75 / 5
- Polubienia
- 30
- Pobrania
- 698
- Wydruki
- 3
- Wyświetlenia
- 3814
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This LCD cover is to fit the Big Tree Tech TFT35 V3.0 on a MK3/S Bear frame.
In this design the supports are held in by 4) 3mm x 8 screws, which also hold the board in the cover. Trying to think of a better way because there isn't much room, which makes the screw tabs quite small. It seems to work just fine though.
This is remixed from https://www.thingiverse.com/thing:4046889
Edit 2/29/20 There seems to be a difference in the placement of the components on the TFT screens, check the pictures to see if V2 or V3 would fit your screen better
Edit 3/2/20 Moved left side of screen hole in 2mm to cover the screen better on V2 now labeled V2-1
Print instructions
Unassociated tags: MK3 Bear
Category: 3D Printer Parts Print Settings
Printer Brand: Prusa
Printer: i3 MK3S
Rafts: No
Supports: No
Resolution: .2
Infill: 15
Filament: Filament One PLA Glint Midnight