Minion Nic
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
UPDATE: Cura had a problem slicing one area. I think I corrected it. Number 6 in a series. Please hit the like button!…
- Ocena
- 4,75 / 5
- Polubienia
- 31
- Pobrania
- 157
- Wydruki
- 6
- Wyświetlenia
- 1930
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Sculptures
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
UPDATE: Cura had a problem slicing one area. I think I corrected it.
Number 6 in a series.
Please hit the like button!
Minion Nic is a little known Minion. He just missed the casting call for the Minions Movie, butt you saw his brothers in the movie. He is of course naked because they hadn’t learned about clothes yet. As you can see, Nic is from Australia and was hunting with his boomerang.
Like the rest, Nic is assembled by friction fit.
The hair piece may benefit with a brim, unless you want a really messy hairdo.
For assembly there is one tricky part. Insert hair into skull. Check hair carefully for elephants foot. Maybe even chamfer the bottom a little. Once hair is in, lay goggles against skull. The side with the T printed on it goes against skull. Insert upper key into skull through goggles and then place band over key and into goggles. Continue on with the rest.
Nic is right on the verge of being tipsy. His upper body can rotate to move the center of gravity a little - or just to pose him. If you want a little more stability there is a “feet with stand” file. You can print that one with a change filament in your preferred slicer so that it prints the stand in say a light brown to represent sand and then change to yellow to do his actual feet.
Print Settings
Printer Brand:
Creality
Printer:
CR-10
Rafts:
No
Supports:
No
Resolution:
.12
Infill:
10
Filament: Various PLA Various How I Designed This ===================
Shalr3d for IPad.
Category: Sculptures