Minion Bob multi color
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Continuation of a series. Bob is #2, after Kevin. ( https://www.thingiverse.com/thing:4713479 ) Inspired by the…
- Ocena
- 5 / 5
- Polubienia
- 36
- Pobrania
- 187
- Wydruki
- 2
- Wyświetlenia
- 1086
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Sculptures
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Continuation of a series. Bob is #2, after Kevin. ( https://www.thingiverse.com/thing:4713479 )
Inspired by the artwork of reddadsteve. https://www.thingiverse.com/reddadsteve/designs
Parts are oriented as they should be printed.
You may want to use supports on the neck where the mouth prints. No other is needed.
Everything is friction fit.
Please consider scrolling up and hitting the like button!
If you look at the bridge of the goggles - one side is curved other is straight. Straight goes up.
Come back and post your makes.
****Minion Stuart has arrived: https://www.thingiverse.com/thing:4729619
Print Settings
Printer Brand:
Creality
Printer:
CR-10
Rafts:
No
Supports:
No
Resolution:
0.12
Infill:
Various
Filament: Hatchbox and ESun PLA Multiple
Notes:
Hatchbox true blue, true black, true white, true red, transparent green
ESun yellow
Category: Sculptures