RPi Project Box
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Added some LEDs that needed more power that RPi could provide. Needed to add a level board, 5V power and wiring for…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 194
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Added some LEDs that needed more power that RPi could provide. Needed to add a level board, 5V power and wiring for the LEDs.
Decided to make a case for it all. This is all self contained. The 5V adapter, and a 4PIN JST connector are press fit into place. A clip holds the RPi securely in place. The fan is bolted on with M2x8 machine bolts.
If you are looking at my wiring:
YELLOW: data from GPIO10
BLACK: ground
RED: 5V
GREEN: 3.3V
I am powered via POE and a splitter, on the LAN.
Print Settings
Printer Brand:
Creality
Printer:
CR-10
Rafts:
No
Supports:
Yes
Resolution:
0.1w
Infill:
15%
Filament: ESun PLA+ Purple
Category: 3D Printer Accessories