Atlas 40v/80v Battery Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I made a model to wall mount an Atlas 80V battery.
- Ocena
- 5 / 5
- Polubienia
- 11
- Pobrania
- 136
- Wydruki
- 3
- Wyświetlenia
- 861
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
I recently bought Harbor Freight's Atlas 80V lawn mower and wanted to mount it outside of the charger and tool so I made a wall mount for the battery.
This mount should work for both the 40V and 80V batteries. I don't have the 40V battery to test it, but both voltage batteries fit in the same tool, so there should be no fitment issues. The battery latch even catches for a secure fit if you choose to mount the battery in a different orientation. It's not perfect, but it is a pretty close fit for making this in TinkerCAD.
I designed the countersunk screw holes to fit a 1 inch #6 wood/cabinet screw, it's what I had on hand.
Use support everything and print vertically like the model is already oriented. The only support that will print is for the gap for the latch recess.