Merged Retraction Test 0 to 7mm
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Retraction test provided by FoxyLad is very useful. So I merged some parts for print at once.
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 81
- Wydruki
- 0
- Wyświetlenia
- 700
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Test Models
- Licencja
- Creative Commons — Public Domain
I tried tuning retraction setting for TPU. Each test is just in 8 minutes, but I needed to remove printed part and print part in new setting. I hope to start print for several setting at once, so I merged some settings.
From the front, the settings are as follows,
Retraction: 0mm, 1mm, 2mm, 3mm, 4mm, 5mm, 6mm and 7mm
Retraction speed: 70mm/s
temperature: from 200 degree to 235 degree in 5 degree step
230 degree for Polymaker TPU95, 225 degree for Reprapper TPU
If you’d like to tune some parameters, please refer the 3mf file.