GoPro Jeep Footman Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
GoPro Mount for flat surface or Jeep Footman Replacement
- Ocena
- 0 / 5
- Polubienia
- 40
- Pobrania
- 127
- Wydruki
- 0
- Wyświetlenia
- 1163
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This GoPro mount can be used on any flat surface with two M4 caphead screws set into the base of the footman, and an additional M5 nut is needed for GoPro mount. Works with both GoPro camera and hard shell mounting points.
Originally designed to be used as a footman bar replacement with added GoPro attachment point for a Jeep Wrangler.
Instead of mounting with an inset M4 (see photos), the footman mount can be tapped for a M8 screw as well.
For hood mounting: Use two M4x20 caphead screws, nuts, and washers to mount to existing hood mounting holes. Reuse existing rubber gaskets from previous footman. Recommend using heavy strength glue when seating screw in socket for strong bond of plugs to footman (plugs can make a click sound when set in place).
Optional: Tap footman with M8x1 tap, drill out existing hood hole to 8mm, and secure with two M8x8 screws and washers.
Print Settings
Rafts: No
Supports: Yes
Resolution: 0.2mm
Infill: 50%
Filament Used: Prusament PETG