Hypermobility Finger Splint
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a remix without the numbers on the inside of the ring and resized to fit a general ring size scaling.
- Ocena
- 4,75 / 5
- Polubienia
- 442
- Pobrania
- 3538
- Wydruki
- 18
- Wyświetlenia
- 17 423
- Oceny
- 12
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Medical Tools
- Licencja
- Creative Commons — Public Domain
The base model is a size 10 and I went through and did test prints to get as close as I could to general ring sizes to make things easier for folks to print. You may need to adjust as you see fit for shrinkage and other things but as it stands, it is close enough for a base!
These types of rings are used for all manner of finger issues but is generally seen for hypermobility, EDS (Ehlers-Danlos syndrome), trigger finger, swan neck, etc. Generally it is recommended these be printed in resin due to PLA and other plastics being much more prone to harboring bacteria due to the layers, however they can generally be printed in whatever material. I have personally done them in resin, PLA, and PETG. You can generally fir two of these per finger.
Ring Size 4: 75%
Ring Size 4.5: 77%
Ring Size 5: 80%
Ring Size 5.5: 82%
Ring Size 6: 83.5%
Ring Size 6.5: 85%
Ring Size 7: 88%
Ring Size 7.5 : 89.5%
Ring Size 8 : 90%
Ring Size 8.5 : 95%
Ring Size 9: 96.5
Ring Size 9.5: 98%
Ring Size 10: 100%
Ring Size 10.5: 102%
Ring Size 11: 104%
Ring Size 11.5: 105.5%
Ring Size 12: 107%
Ring Size 12.5: 108%
Ring Size 13: 110%
Ring Size 13.5: 115%