Picatinny Handstop
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A Simple Handstop for my Caliburn pump foregrip mounts via Picatinny rail. might also be usable for airsoft or real…
- Ocena
- 4,75 / 5
- Polubienia
- 139
- Pobrania
- 934
- Wydruki
- 5
- Wyświetlenia
- 3165
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution
A Simple Handstop for my Caliburn pump foregrip
mounts via Picatinny rail.
might also be usable for airsoft or real firearms, but only tested on a Calburn 'nerf' blaster. (temperature and recoil considerations)
Helps keep your hand from slipping when using a 'traditional' or 'thumb-over-bore' hand position
Metric Hardware Required:
1 M5x30mm bolt
1 M5 nut with 8mm wrench flats.
Print in the orientation as provided; no supports needed with a good printer (40degree overhang) but strong bed adhesion is required.
-This unusual orientation was specifically chosen for part strength.
EDIT 3/1/2020: increased the build plate contact area slightly for safer printing
Category: Toy & Game Accessories