Nerf Rival Perses Rev Trigger Low Profile
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement Flywheel Rev Trigger for Nerf Rival Perses blaster about 4-5mm lower profile than the stock trigger; more…
- Ocena
- 5 / 5
- Polubienia
- 8
- Pobrania
- 70
- Wydruki
- 2
- Wyświetlenia
- 367
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution
Replacement Flywheel Rev Trigger for Nerf Rival Perses blaster
about 4-5mm lower profile than the stock trigger; more comfortable for small hands
Additionally, will stay engaged so long as main trigger is held down. (this feature appears to have been considered on the Stock trigger; but was not implemented in production. the tooth that would enable it is undersized)
I designed this part after the stock rev trigger on my Perses broke - the tab that engages the trigger interlock broke off. (the lock that prevents firing before first revving motors, to prevent jams)
Took the opportunity to make the new trigger smaller at the same time.
EDIT: 9/20/2019 Updated tolerances so trigger works better with the Safety.
Print Settings
Printer Brand:
Monoprice
Printer:
Select Mini
Rafts:
Yes
Supports:
Yes
Resolution:
.1
Infill:
30
Filament: Mika3d PLA Red
Category: Toys & Games