Reconfigurable name tag by KMS
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Inspired by letterboards, this name tag can be flexibly configured thanks to the dovetail system.
- Ocena
- 0 / 5
- Polubienia
- 35
- Pobrania
- 81
- Wydruki
- 0
- Wyświetlenia
- 629
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Fashion Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
You can equip this name tag as you wish. The dovetail prevents the letters from falling out. Ideal for visitors or workshop participants.
Yours KERLE MAKERSPACE
PS: Feel free to support my work by liking or leaving a comment.
Updates and Upgrades
| Change / Update | Release | Version | Change |
Assembly
You can add characters to the slider as you wish by sliding the available characters from the side onto the slider. Note that the dovetail and the letter are delicate and can break when trying to push them in from above.
Take the safety pin(length between 15-25mm) and feed it through the needle hole of the cover (no.2). The safety pin should not protrude on the inside when you have aligned the needle.
Finally, press the LetterSlide into the BackCover. Pay attention to the tolerances of your printer, since it is a press fit and you should be able to reconfigure the tag, gluing is not an option ;) .
The holes on the back (no.1) are for easy disassembly, so you can push the slider out.