Hue Play 71 degree stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
With this 71 degree angled bracket you get a much smoother look on the wall
- Ocena
- 5 / 5
- Polubienia
- 52
- Pobrania
- 385
- Wydruki
- 7
- Wyświetlenia
- 1519
- Oceny
- 7
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
I've remixed this because I wanted to have light going up the wall next to the television. the 45 degree angle I remixed it from was a simple clean design but I had to move the Hue Plays further away from the wall to prevent a 'hot spot' of light on the wall.
With this 71 degree angled bracket you get a much smoother look on the wall (I've placed them about 3/4 cm away from the wall and it appears much smoother.
Yes the 71 degree angle is a bit weird, but this will have a smooth side on the top and bottom of the model. (bit of OCD)
https://www.thingiverse.com/thing:4093491
Stand to place your Philips Hue Play lamp at an 71 degree angle.
Use the screw from the supplied stands to mount the lamp to this stand.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
Doesn't Matter
Resolution:
200
Infill:
20
Filament: 123 3D PLA
Category: Decor