500ml Sport Bottle Cap
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Cap that can be used to turn a standard 500ml water bottles into a sport bottle.
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 122
- Wydruki
- 0
- Wyświetlenia
- 780
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution
I needed a quick way to turn a standard 500ml water bottle, into a sport bottle, where I could quickly change out the cap, as the water bottles were used. We had a sporting event where we needed to share the water, and needed a way to allow that sharing to occur without having the participants touch the opening of the bottle with their mouth. I was not able to find a good thread model, so I designed a thread model that fit the thread type on the top of the bottle. This is for the bottles with the ~24mm opening, and have three independent threads, versus a single thread.
I was having issues trying to make a good seal, so I quickly modeled up the cap, to use a standard 5/8" hose washer, like what is used on typical garden hoses. This makes a great seal to keep the cap from leaking and was a very inexpensive way to make both the model easy to print and have something that could be changed out quickly.
I also found it works on the smaller 8oz bottles shown in the pictures.