Flashforge Creator Pro Upright Spool Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This filament holder slides on to the top of the Flashforge Creator Pro to make filament spools more accessible. You…
- Ocena
- 0 / 5
- Polubienia
- 20
- Pobrania
- 120
- Wydruki
- 0
- Wyświetlenia
- 911
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
This filament holder slides on to the top of the Flashforge Creator Pro to make filament spools more accessible. You will need 2 sides (mirror images of each other--mirrored in slicer) & 1 base.
It also requires 1/2" PVC pipe about 6" long with 2 PVC pipe caps.
Filament unspools directly into the extruder. The main downside is that you can't use the clear plastic enclosure with this holder, so you have to use another holder for printing ABS.
Versions:
- standard side: 8.91" tall overall
- shorter side: 8.64" tall overall
- shortest side: 6.16" tall overall (our favorite)
Original design by Sidharth Kumar!
Print Settings
Rafts:
No
Supports:
No
Resolution:
0.2-0.3mm
Infill:
30%
Filament:
Hatchbox PLA
Notes:
- Print the base on the flat face (the side). You shouldn't need supports Print the sides on the flat face (the back)
Category: 3D Printer Accessories