Split Pour Cup for Vase Mode (2, 3, 4 & 5 chambers)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a paint/resin/silicone/etc pouring cup with 2-5 chambers, designed to be printed in vase mode only.
- Ocena
- 5 / 5
- Polubienia
- 24
- Pobrania
- 214
- Wydruki
- 1
- Wyświetlenia
- 899
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
This is a paint/resin/silicone/etc pouring cup with 2-5 chambers, designed to be printed in vase mode only.
I made this to make printing these cups a bit faster and with less filament than you might need with other designs.
For correct printing, please use the correct cup for your nozzle size. If scaling up, please scale up your line width as well, or use a cup designed for a smaller nozzle, scaled up to the size of your nozzle.
Example: If you want to scale the cup by 150%, and you have a 0.6mm nozzle, pick the 0.4mm cup and scale it up 150%. That will have the proper clearance for that line width.