British Army Field Telephone Set D wire panel
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
the wire panel inside a British Army Field Telephone to hold the wire from Battery
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 474
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Props
- Licencja
- Creative Commons — Attribution
Recently I have been working on some British Army Field Telephone and the wire panel in my Set D has broken into pieces. To make it work again I have to design the panel to hold the wire.
This panel is designed after the measurement of the real thing so it fits to hold onto the box inside. The diameters for the holes on both side is 6.4mm so either 6 to 6.3mm diameter copper will fit. After inserting the copper part you could rewire the whole thing again and make it work.
For the panel parts, since the fieldphone would not generate any heat during operation, you can print either in PLA or PETG.
Tips: after rewiring the whole thing with a battery box, 2 D-size battery could make it work.