Rear Fishing Rod Rack
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The Rear Fishing Rod Rack is intended to be used with the Front Fishing Rod Rack. The set of assemblies allow the user…
- Ocena
- 0 / 5
- Polubienia
- 59
- Pobrania
- 131
- Wydruki
- 0
- Wyświetlenia
- 2660
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution
The Rear Fishing Rod Rack is intended to be used with the Front Fishing Rod Rack. The set of assemblies allow the user to mount fishing rods on their Tesla roof rack. The Fusion 360 file lists all additional hardware needed to use the racks. All steel hardware is recommended to be 316 stainless steel to prevent rust. All parts were printed using PETG except the ClampPads. These were printed using NinjaFlex.
In addition to transporting fishing rods on the Tesla, the Rear Fishing Rod Rack's two modular RodHolderWithM6HeatSetInserts may be used with the two LockRings, two FemalBayonetConnectors and the CaddyBaseShortBidirect to mount fishing rod holders on your kayak assuming you have a compatible track mount system. A 3d printable YakTrackNut is provided for test-fit but the steel YakTrack nuts should be used to mount a fishing rod holder.
Print Settings
Printer:
TrueUpLZ
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
20%
Filament:
Atomic Filament PETG PRO
Jet Black
Notes:
I used 5 vertical shells and 5 top/bottom shells in PrusaSlicer. The M8 threads in the RodClamp should be cleaned up using a tap to yield smooth operation of the RodHolderKnob for tightening the clamp.
Category: Sport & Outdoors