Split smoke for the gCreate Official Rocket Ship
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The smoke for the gCreate Official Rocket Ship, split in to two parts to fit on a smaller sized bed than the original.
- Ocena
- 0 / 5
- Polubienia
- 25
- Pobrania
- 111
- Wydruki
- 3
- Wyświetlenia
- 927
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Sculptures
- Licencja
- Creative Commons — Attribution
After printing the gCreate Official Rocket Ship in full size, I went to print the smoke, only to find it wouldn't fit on my printer - an Ender 3 v2.
Thus, I began the quest to learn how to split a model in two pieces.
This is my first remix, and I've never done any 3D modelling, so I really hope this works out for people. I had no problems printing it.
The gCreate Official Rocket Ship has not been uploaded to Printables.com, and as such, I've posted this as a remix of a remix. I don't know if the remix found on here is the original size, so I would recommend downloading the actual Rocket Ship from Thingiverse.
The original file, as well as the Rocket Ship this fits with, can be found at https://www.thingiverse.com/thing:427789
NOTE:
When slicing the model, I found that the first layer looked kinda funky, so I offset it by -1 mm on the Z-axis on both of the parts.
-----
I printed these without supports, with a resolution of 0.2, and 10% infill.