Pen / Pencil Tray
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is the first thing I designed a few years ago experimenting with Tinkercad, even before I got my first 3D Printer…
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 39
- Wydruki
- 0
- Wyświetlenia
- 389
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
This is the first thing I designed a few years ago experimenting with Tinkercad, even before I got my first 3D Printer and got into 3D Printing about a year ago from the creation of this post. It's a simple design for a Pen / Pencil tray. I needed something to prevent my pens and pencils from rolling away whenever I used and set them down. Since I didn't have a 3D printer back then, I used Shapeways.
The original dimensions are X = 127mm x Y = 177.8mm x Z =12.7mm.
Scale as you see fit.
Tips are greatly appreciated. :-)
Print Settings
Printer Brand:
Monoprice
Printer:
Maker Ultimate
Rafts:
Doesn't Matter
Supports:
No
Resolution:
.32
Infill:
20%
Filament: 3D Warhorse PLA Wood
Notes:
Printed with a .6mm nozzle
Category: Office