Dyson V11 Long Wand Tube Wall Mount Bracket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A wall-mounted accessory for holding the Dyson V11 (and compatible) floor wand tube.
- Ocena
- 5 / 5
- Polubienia
- 30
- Pobrania
- 215
- Wydruki
- 4
- Wyświetlenia
- 801
- Oceny
- 6
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
We store the vacuum itself in the wall charger, but the long wand with floor attachment is usually detached and needs a home. This bracket is designed to hold that.
NOT intended to hold the weight of the vacuum.
First version/release (filenames V9) has vertically aligned holes. A later version with horizontal holes will also be available.
PRINTING
I printed with 4-perimeters and using ABS. Supports on Build Plate Only. Layer height 0.2 or 0.3 should be fine. Nozzle of 0.4 or 0.6 should be suitable. Print with small diameter surface on build plate, printer should have no problem doing the taper as it goes up.
Prusa print time is over 2hr. Voron print time is 1h.
Coming Revisions
- Side by side holes instead of vertical.
- Plugs to accent/hide the screws?