Klackers (Print in place)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
These are klackers or noisemakers that print in place as one part!
- Ocena
- 5 / 5
- Polubienia
- 30
- Pobrania
- 176
- Wydruki
- 4
- Wyświetlenia
- 872
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial
These are klackers or noisemakers that print in place as one part!
To have a successful print, you must have good adhesion to the bed. If not use helpers or a brim. For the loudest klackers, more walls and infill the better but watch out for curling. If you have issue with curling, enable z-hop, or increase the amount of plastic after the tangency of the balls.
Getting them to Klack, if are having a hard time getting them to klack I found the easiest way to get them started is to set them flat on a table so the klackers are spread out and as you pick them up off the table whip them back down to make them klack. There are two techniques; the single klack and the double klack as demonstrated here.