Modular system mount for pi camera v2 with fisheye lens IMX219
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
assembly instructions for the modular system on the creator's page https://www.thingiverse.com/thing:1079807 you'll…
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 39
- Wydruki
- 0
- Wyświetlenia
- 369
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
assembly instructions for the modular system on the creator's page https://www.thingiverse.com/thing:1079807
you'll need
one m3x25mm bolt and nut (or 20mm without nut) to secure the camera mount and the cover
two m5 Tnuts and bolts to attach the mount to the frame
Edit 04/15
repositioned the pin in the front cover and different cut out in the back cover for a better fit of the pi camera
added photo of the camera in place
this is a link for the lens if you're interested , I am not affiliate in any way https://www.amazon.com/Waveshare-IMX219-Camera-Official-Raspberry/dp/B07H2D4WYR?ref_=ast_sto_dp https://www.aliexpress.com/i/32918557288.html
Print Settings
Rafts:
Doesn't Matter
Supports:
No
Resolution:
0.2
Filament:
pla pla
Category: 3D Printer Accessories