10x10 drag chain mount for CR10 Y axis
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I've never been a fan of printing my own chain links so i bought some 10x10 drag chain, took the design from…
- Ocena
- 0 / 5
- Polubienia
- 21
- Pobrania
- 156
- Wydruki
- 0
- Wyświetlenia
- 1619
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I've never been a fan of printing my own chain links so i bought some 10x10 drag chain,
took the design from https://www.thingiverse.com/thing:2798484 and https://www.thingiverse.com/thing:2829377 and modified both mounts to fit it
Notes:
I had to shorten the frame mount bend because it was interfering with my bed leveling knob
you can still print your own chain links
you will need a cable extension, as you can see from the pictures there is not much left (at least on the CR10 Mini like mine)
2020 update:
Bought silicon spacer for the bed to replace the springs so I edited the mount to fit it
Print Settings
Printer Brand:
Creality
Printer:
CR-10 Mini
Rafts:
Doesn't Matter
Supports:
Doesn't Matter
Resolution:
0.2
Infill:
100%
Category: 3D Printer Accessories