CR 10, Ender 3 10x20mm X axis chain mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
UPDATE 02.27 - file motor mount.stl switched to a bondtech extruder and the old file didn't fit anymore so i made a…
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 55
- Wydruki
- 0
- Wyświetlenia
- 556
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
UPDATE 02.27 - file motor mount.stl
switched to a bondtech extruder and the old file didn't fit anymore so i made a 4mm plate to fit between the stepper motor and the extruder, stiffened up the chain mount too
This is a remix of the most popular X axis chain made by Fedor Sosnin https://www.thingiverse.com/thing:3132855 go buy him a cup of coffee
After reading way too many comments of people printing their own links and in the end they were breaking or there were too much friction between them i surrendered and decided to just buy one boring black cable chain
If you buy a closed/bridge type chain you will have to cut each link and push the cable inside (could be slightly cheaper but maybe not worth it) it's usually sold by 1 meter unit, less than half will do the job.
Print Settings
Printer Brand:
Creality
Printer:
CR-10 Mini
Rafts:
Doesn't Matter
Supports:
Doesn't Matter
Infill:
100%
How I Designed This
modification to the hot end file: modified the socket to fit 10x20 chain, increased structure thickness couple millimeters so holds on the rollers even better, you may also need to make the holes bigger to fit your chain
modification to the extruder file: stretched the file on one axis untill i reached the wanted size for the socket
Category: 3D Printer Accessories