Ender 3 - LGX Lite - Manta MK2 Direct Drive Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An LGX Lite mount for the Manta MK2 fan duct.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 30
- Wydruki
- 0
- Wyświetlenia
- 552
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution
This is a mount for the Manta MK2 fan duct to use an LGX Lite extruder.
There are two different designs: Main and Alternate. Neither design require supports. I recommend printing in PETG.
Print Recommendations
- Nozzle Size: 0.4mm
- Layer Height: 0.2mm
- Perimeters: 3-4
- Infill: Gyroid
- Infill Percentage: 10-20%
- Supports: No
Instructions
I haven't tested the mount on the Manta MK2 however the mounts are based on the sherpa mini direct drive mount so I don't see any reason why it wouldn't work.
The side screw holes require M3x8mm.
In the Main design, an M3 nut can also be used at the back to further stabilize the extruder but not entirely required. If you do decide to use the M3 nut, then the bottom right screw on the LGX lite which aligns with the nut will need to be replaced with an M3x30mm screw.
With the Alternate design, the 2mm spacer that comes by default with the LGX Lite will be replaced with the 2mm spacer on the mount. As a result, the two-side screws are optional here but if you decide to use them it's the same requirement of M3x8mm screws.
Download
In addition to the 3MF files, the project's step file and fusion 360 file is included.