Rhombus, Balistra, & Hexagon II
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Three pots, four choices. Which will it be? wait...
- Ocena
- 0 / 5
- Polubienia
- 21
- Pobrania
- 62
- Wydruki
- 0
- Wyświetlenia
- 378
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Four more pots (maybe three?) for your gardening pleasure! The Rhombus and Hexagon II are two separate pots I created prior to melding them together into one of my other designs, the Rhombagon Spiral. The Balistra is something I did recently by molding two Hexagon pots together, one of them rotated a little bit. I have done the same with the Hexagon II pot in this collection. The result reminded me of arrow slits in a castle, one of the terms for them being balistraria. I shortened that to Balistra because it sounded cooler.
Resize to your heart's content, and happy planting!
Print Settings
- Layer Height – 0.2mm
- Material – PETG (recommended), PLA, or other
- Infill – 20% Honeycomb
- Perimeters – 3
- Top Fill Pattern – Concentric
- Bottom Fill Pattern – Concentric or Octagram Spiral
- Seam Position – Aligned
- Z-Hop – 1.5mm
NOTES
There are 60-degree overhangs with a few exceeding that, and all of the small corners might curl up a bit when printing. If this concerns you, you may want to print at a lower speed and/or increase the Z-hop to 1.5mm or more (can't be too careful.)
The pot I designed is compatible with all of my frames, do not worry about the fit.
The normal pot has 3mm thick walls. I have not printed the thinner version of the pot yet. It should be thick enough at 1.5mm, but if you print it and experience issues let me know!
My Other Plant Pot Designs