Ender 3 Dual Z-Axis Mod with Braces Remix
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remixed to fix a couple of issues. Holes widened to snug fit M5 bolts without the need for drilling. The heads on the…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 418
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
Remixed to fix a couple of issues.
Holes widened to snug fit M5 bolts without the need for drilling.
The heads on the top bolts interfere with the heads on the bolts that mount the bearings which doesn't allow the bearing to slide for proper alignment. So I moved the top hole tunnels toward the center slightly to allow clearance.
The depth of the top bolt tunnels was to long for 25mm bolts and to short for 30mm bolts which meant you needed to cut bolts to length. So I lowered the top hole depth slightly to allow 25mm M5 bolts to be used.
Printed the same as the original.
This is a very good design. Thanks to the author!
Print Settings
Printer:
Voxelab Aquila N32
Rafts:
No
Supports:
Yes
Resolution:
0.2
Infill:
35% Honeycomb
Filament:
eSun PETG
Transparent Blue How I Designed This ===================
Category: 3D Printer Parts